Page 1 of 1

Shiro WIP Fursuit

Posted: Mon Oct 28, 2019 12:43 pm
by Shiro
After years of waiting (and for that matter inactivity on the forums) I recently commissioned a fursuit and figured I might aswell share progress here.
Ref
Ref
Handpaw Bottom
Handpaw Bottom
Handpaw Top
Handpaw Top
Head
Head
Head in goo
Head in goo

Re: Shiro WIP Fursuit

Posted: Mon Oct 28, 2019 12:48 pm
by Shiro
Pictures continue.
Tail
Tail
Tail Close
Tail Close
Rosettes
Rosettes

And Finally the body (still being adjusted and was first fitting)
Body
Body

The Foot paws and head is still in progress but I will share once they are done aswell.

I'm also working on some electronics inside the suit atm although the one will remain a "secret" till its finished (if we don't destroy it in the process)
The other one is a 5v speaker system with an array of buttons (max 14) that each triggers a unique sound when pressed. Atm only the min required buttons is connected for testing purposes. Once I have more buttons and the correct resistors (Rustenburg is useless) Ill setup the array
Prototype speakers
Prototype speakers
I have a video of version one with only the 1 speaker and no amp that ill upload to youtube sometime

Re: Shiro WIP Fursuit

Posted: Mon Oct 28, 2019 1:00 pm
by Rakuen Growlithe
Ooh, it's going to be a snep. that could make some other people here jealous.

It's looking pretty good so far. I think the head is the most important part for the look of a fursuit.

Re: Shiro WIP Fursuit

Posted: Mon Oct 28, 2019 1:31 pm
by Shiro
Thanks :)

Forgot to mention there is a second set of hand paws that will be made after the head and foot paws is complete. It will be a 5 finger semi open one. Then further down the line I also plan to commission a realistic head.

Re: Shiro WIP Fursuit

Posted: Mon Oct 28, 2019 5:42 pm
by Shiro
Quick Video of the one with 2x speakers and an amp. Atm has some interference but its expected atm :)


Re: Shiro WIP Fursuit

Posted: Wed Oct 30, 2019 2:02 am
by Trace
That is looking fantastic!
Please be sure to share the end result when it's done. :3

Re: Shiro WIP Fursuit

Posted: Wed Oct 30, 2019 11:13 am
by Shiro
Trace wrote: Wed Oct 30, 2019 2:02 am That is looking fantastic!
Please be sure to share the end result when it's done. :3
Yip Yip
Will also load photos, vids after I went out suiting, at least till Jan when I move away from my Friend / handler.

Re: Shiro WIP Fursuit

Posted: Thu Oct 31, 2019 11:05 am
by Shiro
Decided to register a youtube channel for my fursuit rather then use my old g-mail accounts channel.
Also uploaded a better quality video and removed the prevision one from the old channel.




And as an update I have decided to scrap the small amp in that prototype in favor of Creative USB speakers that has way better sound quality and power.

Re: Shiro WIP Fursuit

Posted: Fri Nov 01, 2019 10:48 pm
by Shiro
Yay the suit itself is done :)
Prototype fursuit sound remains a prototype for now. I could not make it to the electronics store to get the resistors and better switches today.
We did not add in the electronics due to having to destroy the enclosure in order to modify the internal electronics and without being able to get it back together it wont be of use and its put on hold till the realistic head. Sins the next head will be a 3D printed head we can build the head to have its own enclosure for the special electronics. It is quite expensive electronics and a total gamble modifying it, but I happily take on the risk :)

As Promised pics.
IMG-20191101-WA0018.jpg
IMG-20191101-WA0016.jpg
IMG-20191101-WA0007.jpg
IMG-20191101-WA0006.jpg
IMG-20191101-WA0005.jpg
Thanks to @artyscubagal for all the love and attention put into the building of the suit, I love it :)

Re: Shiro WIP Fursuit

Posted: Fri Nov 01, 2019 10:50 pm
by Rakuen Growlithe
Oooh! Scary kitty pouncing from out of the darkness!

Re: Shiro WIP Fursuit

Posted: Sat Nov 02, 2019 10:18 am
by ShadowTale
Supurrrb suit! Love the eyes :D

Re: Shiro WIP Fursuit

Posted: Sun Nov 03, 2019 10:47 pm
by Shiro
ShadowTale wrote: Sat Nov 02, 2019 10:18 am Supurrrb suit! Love the eyes :D
Thanks, feels so soft :)

Feetpaws are also being redesigned to be more Lightweight and way Slimmer. This snep is hopelessly to bouncy and clumsy for big fluffy paws :lol:
Redesign footpaws
Redesign footpaws
darkened area is an idea of where my foot will sit (to scale / trace of my own foot)
Directly around that is the new paw.
And the top big outline around everything is the old paws outline when my foot was in the same location.

Re: Shiro WIP Fursuit

Posted: Tue Nov 05, 2019 3:57 am
by Trace
The suit looks great! Very well done to everyone involved. ^.^

Re: Shiro WIP Fursuit

Posted: Tue Nov 05, 2019 7:40 am
by Shiro
Trace wrote: Tue Nov 05, 2019 3:57 am The suit looks great! Very well done to everyone involved. ^.^
Thank you, overall I'm very happy with how it came out and cant wait to get it back with the new slimmer and tighter fitting footpaws :)
There is still quite a few things we have planned for this suit so it technically is still a WIP but a usable WIP :)

Re: Shiro WIP Fursuit

Posted: Wed Nov 27, 2019 8:54 pm
by Kihara-Quagga
Just wow!! Love the fuzzy paws!!! :3

Re: Shiro WIP Fursuit

Posted: Sat Nov 30, 2019 9:22 am
by Shiro
Kihara-Quagga wrote: Wed Nov 27, 2019 8:54 pm Just wow!! Love the fuzzy paws!!! :3
Thanks, however those paws will nether be used again due to impracticality of them. Tripping over your own paws = useless :lol:

I forgot to mention here(did on telegram) that I designed and prototyped a new digitigrade (100% Tiptoe) paw for the Shiro suit (not the new slimline paw previously posted but a complete different even more slimline paw). I commissioned the maker earlier this week to built the new design footpaws. Taking the hit to get the paws I want aswell as to get the final design out there for all those on Telegram that said its exactly what they have been looking for.

Then finally my head left me so I commissioned a custom modded 3D printed model(unique for Shiro) head with the new footpaws.

Once I get the suit back ill post some pics.

Re: Shiro WIP Fursuit

Posted: Sat Nov 30, 2019 9:48 pm
by Shiro
Yay getting the suit back next Saturday. 7Dec

Re: Shiro WIP Fursuit

Posted: Sun Dec 08, 2019 6:47 pm
by Kihara-Quagga
Awesome! upload pics!!

Re: Shiro WIP Fursuit

Posted: Fri Dec 13, 2019 8:28 am
by Shiro
Ooof uploaded to my Telegram channel and forgot to upload here. Been quite scatterbrained lately with all the changes in life. Mostly good changes but a lot of stress with some of them :)

Here is some vids





Some pics. More can be found in my Telegram channel linked in my sig.
IMG_20191209_084808.jpg
IMG_20191209_084811.jpg
IMG_20191209_085107.jpg

I need a better camera

Re: Shiro WIP Fursuit

Posted: Tue Mar 10, 2020 9:00 am
by Shiro
It has been a while sins I posted here. Shiro's custom designed slimline digitigrade paws was completed a while back and the 3D print head was completed Saturday.
Front
Front
Side
Side
Back
Back
Top
Top
photo_2020-03-10_08-53-43.jpg

Re: Shiro WIP Fursuit

Posted: Tue Mar 10, 2020 9:01 am
by Shiro
photo_2020-03-10_08-54-04.jpg
photo_2020-03-10_08-53-59.jpg
photo_2020-03-10_08-53-56.jpg
photo_2020-03-10_08-53-51.jpg
photo_2020-03-10_08-53-46.jpg

Re: Shiro WIP Fursuit

Posted: Tue Mar 10, 2020 9:05 am
by Shiro
Old vs New
Old vs New
IMG-20200307-WA0024.jpg
IMG-20200307-WA0023.jpg
IMG-20200307-WA0020.jpg
IMG-20200307-WA0019.jpg

Re: Shiro WIP Fursuit

Posted: Tue Mar 10, 2020 9:07 am
by Shiro
Fullsuit
Fullsuit
HEHE this was a hot photo shoot




I did not have the new paws at the maker so the vid was done with the old paws.

Re: Shiro WIP Fursuit

Posted: Tue Mar 10, 2020 5:12 pm
by Faanvolla
That looks awesome!

Re: Shiro WIP Fursuit

Posted: Wed Mar 11, 2020 7:23 am
by Nasheera
That looks awesome! I love the cute eyes and the whiskers :3

Re: Shiro WIP Fursuit

Posted: Fri Mar 13, 2020 6:35 am
by Trace
Awesome, that looks fantastic!

Re: Shiro WIP Fursuit

Posted: Fri Mar 13, 2020 5:41 pm
by Adagio
As a snep myself I have the right to say, thats a damn good looking snep!

Re: Shiro WIP Fursuit

Posted: Tue Mar 17, 2020 11:16 pm
by Shiro
Thanks fluffs.

Lol once you start modding a fursuit there is no stopping. Sending both my tails off to be modded a bit later this week.

I also build a new Jaw stopper for inside the head out of Lego Technic parts. Bought the cheapest set with the most useful parts to build something that can work (result bright green lego parts and weird interconnected parts) XD
Still need to detach the current stopper and glue in the new one if the flex is enough to follow the curve.

IMG_20200315_134051.jpg
Hehe I know I am weird turning to Lego to build something that fits my jaw shape comfortably.