A tough question
Moderator: YoteFox
-
- Posts: 10
- Joined: Sat Jun 10, 2017 8:00 am
- Gender: Does it matter?
- Species: Sergal
- Region: KZN and Eastern Cape
A tough question
Ok. So. I have a tough thing to ask. I have a new fursona, Treble, and I want to bring him to life, possible before Halloween. Now comes the hard part. I need to find someone who can do a decent head base for me. It doesn't have to have ears, a jawset, eyes, or even a nose. I have budgeted R300 out of my birthday money to do this. If there is anyone, or if anyone knows someone, contact me via telegram @Hipstersergal or whatsapp 0717055521 asap
- Sudan Red
- Posts: 698
- Joined: Thu Jun 16, 2016 10:59 am
- Gender: Female
- Sexual preference: Straight
- Species: Lion
- Region: Gauteng
Re: A tough question
I think your budget & timeframe are both a bit tight. I can however say that Nasheera's foam bases are EXTREMELY comfortable & airy. Jake Dane is also top notch at foam carving. Not sure if Niexie (Carousel Studio) does bases, but her fursuits are adorable. Contact any one of them if you want good quality bases.
- Jake Dane
- Posts: 106
- Joined: Sun Aug 04, 2013 5:37 pm
- Gender: Male
- Sexual preference: Gay
- Species: 98% Canine 2% Dragon
- Region: Gauteng
- Location: Krugersdorp JHB
- Contact:
Re: A tough question
Thank you for the mention Sudan
I will be assisting Pulse with this one.
Time-frame isnt really a push its more than a month to make a simple head-base. its a walk in the park; really not a push in the slightest way.
I will be assisting Pulse with this one.
Time-frame isnt really a push its more than a month to make a simple head-base. its a walk in the park; really not a push in the slightest way.
Furaffrinity: http://www.furaffinity.net/user/JakeDane-ZA
Facebook: https://www.facebook.com/JakeDaneSA
Telegram: @Jakedane
Live crazy, live in the now, live for now
Stay NAUGHTY
Facebook: https://www.facebook.com/JakeDaneSA
Telegram: @Jakedane
Live crazy, live in the now, live for now
Stay NAUGHTY
- Sudan Red
- Posts: 698
- Joined: Thu Jun 16, 2016 10:59 am
- Gender: Female
- Sexual preference: Straight
- Species: Lion
- Region: Gauteng
Re: A tough question
Knew you could help, Jake-baby!Jake Dane wrote:Thank you for the mention Sudan
I will be assisting Pulse with this one.
Time-frame isnt really a push its more than a month to make a simple head-base. its a walk in the park; really not a push in the slightest way.
- Rakuen Growlithe
- Fire Puppy
- Posts: 6725
- Joined: Tue Apr 01, 2008 2:24 pm
- Gender: Male
- Sexual preference: Bi
- Species: Growlithe (pokemon)
- Region: Other
- Location: Pretoria
- Contact:
Re: A tough question
The fastest way to make one is probably 3D printing. I know people have done a bunch of tutorials on really cheap fursuit building using 3D printed bases.
"If all mankind minus one, were of one opinion, and only one person were of the contrary opinion, mankind would be no more justified in silencing that one person, than he, if he had the power, would be justified in silencing mankind."
~John Stuart Mill~
“Give me the liberty to know, to utter, and to argue freely according to conscience, above all liberties.”
~John Milton~
~John Stuart Mill~
“Give me the liberty to know, to utter, and to argue freely according to conscience, above all liberties.”
~John Milton~
- Sudan Red
- Posts: 698
- Joined: Thu Jun 16, 2016 10:59 am
- Gender: Female
- Sexual preference: Straight
- Species: Lion
- Region: Gauteng
Re: A tough question
Hmmm faster maybe if you already had a model(?), but it would cost about the same in filament/labour in SA.Rakuen Growlithe wrote:The fastest way to make one is probably 3D printing. I know people have done a bunch of tutorials on really cheap fursuit building using 3D printed bases.
(Since I have a 3D printed base & all. )
- Jake Dane
- Posts: 106
- Joined: Sun Aug 04, 2013 5:37 pm
- Gender: Male
- Sexual preference: Gay
- Species: 98% Canine 2% Dragon
- Region: Gauteng
- Location: Krugersdorp JHB
- Contact:
Re: A tough question
pffft I dont think so. i can make a base in 4 hours if i want to.
3D printing takes forever.
3D printing takes forever.
Furaffrinity: http://www.furaffinity.net/user/JakeDane-ZA
Facebook: https://www.facebook.com/JakeDaneSA
Telegram: @Jakedane
Live crazy, live in the now, live for now
Stay NAUGHTY
Facebook: https://www.facebook.com/JakeDaneSA
Telegram: @Jakedane
Live crazy, live in the now, live for now
Stay NAUGHTY